Removing the Coin-Cell Battery
1 Follow the procedures in "Before You Begin" on page 137.
2 Turn the computer over.
3 Loosen the captive screw on the memory module/coin-cell battery cover
(see "Bottom View" on page 33), and remove the cover.
4 Disconnect the coin-cell battery cable from the system board.
battery cable connector
5 Slide the battery out of the mylar sleeve.
Replacing the Coin-Cell Battery
1 Connect the coin-cell battery cable to the system board.
2 Slide the coin-cell battery into the mylar sleeve.
3 Replace the cover and tighten the captive screw.
Adding and Replacing Parts