Dell Inspiron 1720 Owner's Manual page 129

The drivers that are used by your computer are automatically displayed in
the My Drivers—The ResourceCD has identified these components in
your system window.
6 Click the driver that you want to reinstall and follow the instructions on
the screen.
If a particular driver is not listed, then that driver is not required by your
operating system.
Manually Reinstalling Drivers
NOTE:
If your computer has a Consumer IR port and you are reinstalling a
Consumer IR driver, you must first enable the Consumer IR port in the system setup
program (see "Using the System Setup Program" on page 189) before continuing
with the driver installation (see "Reinstalling Drivers and Utilities" on page 127). For
information about components installed on your computer, see "Determining Your
Computer's Configuration" on page 21.
1 After extracting the driver files to your hard drive, as described in the
previous section, click Start
2 Click Properties, and then click Device Manager.
3 Double-click the type of device for which you are installing the driver (for
example, Modems or Infrared devices).
4 Double-click the name of the device for which you are installing the driver.
5 Click Driver tab, and then click Update Driver.
6 Click Install from a list or specific location (Advanced), and then click
Next.
7 Click Browse and browse to the location to which you previously copied
the driver files.
8 When the name of the appropriate driver appears, click Next.
9 Click Finish, and then restart your computer.
, and then right-click Computer.
Troubleshooting
129