1
3
1
securing tabs (2)
3
card
Replacing the Card
1 Replace the card at an angle to slide it under the securing tabs in the card
compartment.
2 Connect the cable to the card.
Coin-Cell Battery
CAUTION:
safety instructions in the Product Information Guide.
NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
166
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the
To avoid electrostatic discharge, ground yourself by using a wrist
2
cable
2