Silvercrest SDGS 1630 A1 Operating Instructions And Safety Instructions page 38

NOTE
►
►
1) Remove the mains plug from the power socket if connected.
2) Remove the water tank
by the handle (fig. I), then turn the water tank
3) Unscrew the lid and fill up the water tank
the maximum filling level.
SDGS 1630 A1
Use tap water in the appliance. If your tap water is hard, we recommend
that you mix it with distilled water. Otherwise, the appliance will accumu-
late limescale quickly.
Mix the tap water with distilled water in accordance with the following
table for optimal performance:
Water hardness
very soft/soft
medium
hard
very hard
Information about the level of hardness of water in your area can be
obtained from your local water company.
Never use water that contains additives (e.g. starch, perfumes, softening
agents) or condensation (e.g. from dryers, refrigerators, air conditioning
units or rain). These may contain organic or mineral residues that accumu-
late when exposed to heat and can cause noise, brown discolouration and
premature failure of the appliance.
I
Ratio of distilled
water to mains
t
from the appliance base
t
J
water
0
1: 1
2: 1
3: 1
z
by pulling it upwards
t
around.
(fig. J). The "MAX" mark indicates
GB │ IE │ 35 ■