18. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
18.1 CS-RZ25TKR CS-RZ35TKR
18.1.1
Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
18.1.1.1
To Remove Front Grille
18.1.1.2
To Remove Power Electronic Controller
2 Remove 2 caps and 3 screws at the
bottom of discharge vane.
Hook
WARNING
3 Hold both sides of the front grille and
remove it by pulling up and toward
yourself gently.
1 Lift to open the horizontal vane
gently.
Figure 1
Figure 2
144
4 Removing the control
board cover by
releasing the hook.