Table of Contents
Advertisement
3. Switch On/Off and Display
Switch On/Off
System shall be turned on in the correct sequence to avoid any damage.
Figure 3.1 LED Display
LED Display
In normal condition, LED display indicates the SOC as the figure below:
LED Ring
Standby:
Green light flickering 1 s
Work:
Green light flickering 10s
______________________________________________________________________
Switch On/Off and Display
Switch on :
Pressing the power button for about 2-4
seconds. The BMS will start up. The LED
display and power button will light up as
well.
Switch off :
Pressing the power button for >5
seconds, Turns off battery modules.
SOC
Alpha ESS Co., Ltd.
Your Smart Energy
LED Ring
State
Description
SOC<5%
5%=<SOC<25%
25%=<SOC<50%
Page 23 of 31
Advertisement
Table of Contents
