Your Smart Energy
3. Switch On/Off and Display
Switch On/Off
System shall be turned on in the correct sequence to avoid any damage.
Figure 2 M4856-P Switch
Figure 3 LED Display
LED Display
In normal condition, LED display indicates the SOC as the figure below:
LED Ring
Standby:
Green light flickering 1 s
Work:
Green light flickering 10s
______________________________________________________________________
Page 20 of 29
Switch On/Off and Display
Switch on:
Pressing the power button for about 2-4
seconds. The BMS will start up. The LED
display and power button will light up as
well.
Switch off:
Pressing the power button for >5
seconds, Turns off battery modules.
NOTE: when the battery is working
pressing the power button for <5
seconds, LCD display will light up for
30 seconds.
SOC
Alpha ESS Co., Ltd.
LED Ring
State
Description
SOC<5%
5%=<SOC<25%
25%=<SOC<50%