Table of Contents
Advertisement
Your Smart Energy
Step10. Place the inverter bracket on the
cable box bracket and confirm the punch
position.
Step12. Mounting the inverter on the bracket.
Step14. Install the Wi-Fi module and secure it with 2 x M5*10 screws.
Note: Wi-Fi module should be installed on the left side of the inverter bracket.
______________________________________________________________________
Page 16 of 31
Installation
Step11. Please drill four holes (two on each
side) directly on the wall at the marking
positions of the bracket with an impact drill
(bit φ 8.0 mm, length 60 cm) and the depth
of each hole should be about 7 cm.
Step13. Fixed the inverter, customers can
install locks according to your needs.
Alpha ESS Co., Ltd.
Advertisement
Table of Contents
