Table of Contents
Advertisement
Your Smart Energy
Installation
Step5. Remove the inverter and accessories.
Step6. Placed the cable box bracket on the battery and position it with 2 x M5*10
positioning screws.
Step7. Please drill four holes (two on each side) directly on the wall at the marking positions
of the bracket with an impact drill (bit φ 8.0 mm, length 60 cm) and the depth of each hole
should be about 7 cm. Fixed cable box bracket on the wall with 4 x M8*60 and 4 x M6
gaskets.
Step8. Remove the positioning screws.
Step9. Fixed the cable box on cable box bracket and lock the cable box with screws.
______________________________________________________________________
Alpha ESS Co., Ltd.
Page 15 of 31
Advertisement
Table of Contents
