Cisco Catalyst 3650 Command Reference Manual page 62

show etherchannel
Ports in the Port-channel:
Index
------+------+------+------------------+-----------
0
0
Time since last port bundled: 01d:20h:24m:44s Gi1/0/2
This is an example of output from show etherchannel protocol command:
Switch# show etherchannel protocol
Channel-group listing:
-----------------------
Group: 1
----------
Protocol: LACP
Group: 2
----------
Protocol: PAgP
Related Commands
Command
channel-group
channel-protocol
interface port-channel
Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)
58
Load Port EC state
00 Gi1/0/1 Active
00 Gi1/0/2 Active
No of bits
0
0
Description
Assigns an Ethernet port to an EtherChannel group, or enables an
EtherChannel mode, or both.
Restricts the protocol used on a port to manage channeling.
Accesses or creates a port channel.
Layer 2/3 Commands
OL-32639-01