Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
M.2 2230 solid-state
4. Remove the
M.2 2280 solid-state
5. Remove the
hard
drive.
6. Remove the fan.
7. Remove the
wireless
card.
8. Remove the
display
assembly.
9. Remove the
fingerprint-reader
10. Remove the touchpad.
11. Remove the speakers.
12. Remove the
I/O
board.
13. Remove the
power-button with optional fingerprint
14. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
15. Remove the
power-adapter
About this task
The following images indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the pre-requisites you are left with the palm-rest and keyboard assembly.
62
Removing and installing components
Before working inside your
drive, if applicable.
drive, if applicable.
board.
port.
computer.
reader.