Table of Contents
Advertisement
Removing and installing components
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdrivers #0/#1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Base cover
Palm-rest and keyboard
assembly
Base cover
Palm-rest and keyboard
assembly
Battery
Palm-rest and keyboard
assembly
M.2 thermal shield
Palm-rest and keyboard
assembly
M.2 thermal shield
Palm-rest and keyboard
assembly
M.2 2230 solid-state
M.2 thermal shield
drive
I/O board
Palm-rest and keyboard
assembly
Display panel
Display assembly
Display panel
Display assembly
Fan
Palm-rest and keyboard
assembly
10
Removing and installing components
Screw type
Quantity
M2.5x6
7
Captive
2
(M2.5x2.5+5)
M2x3
3
M2x2.2
1
Captive
1
M2x2
1
M2x4
3
M2x2.5
2
M2.5x2.5
6
M2.5x5
2
2
Screw image
Advertisement
Table of Contents
