Table of Contents
Advertisement
5. Install the
memory
modules.
6. Install the
M.2 2230 solid-state
7. Install the
M.2 2280 solid-state
8. Install the
base
cover.
9. Follow the procedure in
Power-adapter port
Removing the power-adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
M.2 2230 solid-state
4. Remove the
M.2 2280 solid-state
5. Remove the fan.
6. Remove the
wireless
card.
7. Remove the
display
assembly.
8. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
About this task
The following images indicate the location of the power-adapter port and provides a visual representation of the removal
procedure.
Steps
Lift the power-adapter port from its slot on the palm-rest and keyboard assembly.
60
Removing and installing components
drive, if applicable.
drive, if applicable.
After working inside your
Before working inside your
drive, if applicable.
drive, if applicable.
computer.
computer.
Advertisement
Table of Contents
