Home Connect Settings - Siemens EX8 LX6 Series Instruction Manual

Manual registration in the home network
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the 0 symbol repeatedly until the
3.
setting appears.
‹ lights up on the cooking position display.
Set the value in the control panel.
ƒ
4.
In the control panel,
Use the "Home Connect" SSID and the "Home
5.
Connect" key to log your mobile device into the hob
network.
If the symbol no longer flashes in the control
D
panel but, instead, lights up constantly, the hob is
connected to the home network.
symbol for four seconds.
0
•'‚
and the symbol flash.
ƒ D
The appliance automatically tries to connect to the
app and the setting
flashes in the control panel.
Start the app on the mobile device and follow the
6.
instructions for manual network registration.
The registration procedure has been completed once
the value appears on the cooking position display.
‹

Home Connect settings

You can adjust Home Connect to suit your
requirements at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
Symbol Function
Registration in the home network (WLAN)
•'‚
Not connected /disconnect network.
‹
Connect automatically.
‚
Connect manually.
ƒ
Connected.
„
Connection to app
•'ƒ
Not connected.
‹
Connect.
‚
Connect to WLAN
•'„
Radio module switched off.
‹
Radio module switched on.
‚
Settings via app
•'...
Switched off.
‹
Switched on.*
‚
Software update
•'†
Update available and ready for installation.
‚
Starting installation.
ƒ
Remote access by Customer Service
•'‡
Not permitted.
‹
Permitted.
‚
* Basic setting
Home Connect
is displayed. The value
•'ƒ
en
‚
49