Table of Contents
Advertisement
en Cookware test
Display
Setting
-
cookConnect System
The settings are configured based on the ex-
tractor hood model.
Restoring factory settings
1
Factory setting
20.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, touch and hold
2.
seconds.
Product information
Customer service directory
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
to view the individual displays.
Cookware test
21 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. → Page 15
21.1 Carrying out Cookware test
Requirement: As a single cooking zone, the flexible
cooking zone is set in such a way that only the indi-
vidual item of cookware is checked.
At room temperature, place the cookware with ap-
1.
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select .
Touch the settings area.
3.
zones.
Home Connect
22 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
16
.
for 4
Display
flashes in the cooking
Value
→ "Overview of the hood control settings", Page 19
1
- Individual settings
.
- Factory settings.
Touch
to access the basic settings.
3.
and light up as a presetting.
a
Touch
repeatedly until the desired setting ap-
4.
pears.
Select the required setting in the settings area.
5.
Touch and hold
6.
a This saves the settings.
20.3 Discarding changes to the basic
settings
Touch
.
▶
a All changes are discarded and not saved.
a The function is switched on.
a After 10 seconds, the result appears in the cooking
zone displays.
21.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
To reactivate this function, touch the settings area.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
for 4 seconds.
Advertisement
Table of Contents
