Recommendations For Users; Warranty - Hanna Instruments HI99163 Instruction Manual

Recommendations
for users

Warranty

HI99163
in workmanship and materials when used for its
intended purpose and maintained according to
instructions. Electrodes and probes are warranted
for a period of six months. This warranty is limited
to repair or replacement free of charge. Damage
due to accidents, misuse, tampering or lack of
prescribed maintenance is not covered.
If service is required, contact your local Hanna
Instruments Office. If under warranty, report the
model number, date of purchase, serial number
(see engraved on the back of the meter) and
the nature of the problem. If the repair is not
covered by the warranty, you will be notified
of the charges incurred. If the meter is to be
returned to Hanna Instruments, first obtain a
Returned Goods Authorization number from
the Technical Service department and then
send it with shipping costs prepaid. When
shipping any meter, make sure it is properly packed
for complete protection.
Hanna Instruments reserves the right to modify the design,
construction or appearance of its products without advance notice.
Before using this product, make sure
it is entirely suitable for your specific
application and for the environment
in which it is used. Any variation
introduced by the user to the supplied
equipment may degrade the meter's
performance. For yours and the meter's
safety do not use or store the meter in
hazardous environments.
is warranted for two years against defects