Table of Contents
Advertisement
Available languages
Available languages
12.1 Time Setup [42] - set time and date
!
Press the OK button once.
!
Set time and date using the direction buttons and confirm with the OK
button.
PM - afternoon
12.2 Camera Setup [43] - camera activation
!
Use the direction buttons to select the required channel.
!
Use the OK button to activate (ON) or deactivate (OFF) the camera paired
on that channel.
12.3 Pairing [44] - pairing of camera and monitor
The camera included in the set is already paired with the monitor on channel 1.
If you wish to pair the camera to a different channel or pair an additional
camera (max. 3 additional cameras) to the monitor:
!
Open the OSD menu by pressing the menu button [13].
!
Select the desired channel using the direction buttons.
!
Confirm using the OK button.
!
Press the pairing button [28] of the camera within 60 seconds.
12.4 Power-Saving [45] - power saving mode
!
Activate (ON) or deactivate (OFF) using the direction buttons.
!
Confirm using the OK button.
If the power saving mode is activated the camera picture will disappear after
approx 2 minutes if no buttons are pressed, the audio function remains on and
the power LED is still illuminated. The picture can be recalled by pressing any
button.
12.5 Scan Period [47] - automatic switching / quad display
These functions can be used when more than one camera is paired to the
monitor.
!
Using the direction buttons select between OFF (no switching or quad
display), 5 Sec. or 15 Sec. (automatic switching in 5 or 15 second interval,
between the activated channels) or Quad (Quad display): up to 4 camera
pictures are displayed in split screen, if a camera is not connected or not
activated, then the corresponding area of the screen remains black. You
can use the direction buttons to switch between the different areas of the
screen.
!
Confirm using the OK-button.
12.6 Brightness [50] - set brightness
!
Select the desired picture brightness (value 0 through 5) using the
direction buttons
12.7 Factory Default [51] - reset
!
Select YES using the direction buttons to reset to factory default settings.
!
Confirm using the OK button.
factory default settings:
camera setup: channel 1 ON / channel 2 OFF / channel 3 OFF / channel 4 OFF
power saving: ON
Scan period:
OFF
brightness:
3
24 - GB
AM - morning
12.8 Playback [48] - playback of recordings
!
Use the direction and OK button to select the desired date file (in
chronological order) and the desired recording (marked with green cursor).
!
Press the OK button to select the recording, the first frame of the recording
is shown.
Use the direction buttons [12:
With the [12:
] button the playback can be stopped. Use the menu button to
go back to the date file. Alternatively the videos on the SD-card can be viewed
on a PC with a video viewer application (Media player).
12.9 SD Card Format [49] - formatting of SD card / deletion
of recordings
!
Use the direction buttons to select format
!
Confirm with the OK button
Formatting deletes all data on the SD-card.
If the SD-card is full, all the data must be deleted before recording can
recommence.
13. Wireless range
The wireless range is dependent on many factors. In an ideal location and by
free line of sight (between both antennas) a range of up to 150 m is possible,
within buildings this is reduced to maybe 20 m.
The range cannot be guaranteed as it is dependent on the local conditions.
A reduction of the range will be caused by:
#
Walls and Floors, in particular those of metal or with metal reinforcement
#
Coated windows (eg. those with Insulating glass), radiators, mirrors and
other metal surfaces
#
Electrical cables and electrical products (eg. Those containing electrical
motors, microwave ovens)
#
Devices using the same or similar frequency eg. WLAN-systems)
14. Maintenance and cleaning
#
The products are maintenance-free: do not open the housings
#
Check the safety and function regularly
#
Remove the mains adapters from the mains sockets before cleaning
#
Use a soft, slightly moist cloth or brush to clean the surfaces
15. Optional Accessories
!
Additional camera DF20K with accessoires. Art. Nr. 27267
!
Antenna extension cable for camera with wallbracket
RG142SMS-2M, length 2 m, absorption 1,6 dB, Art. Nr. 27243
RG142SMS-4M, length 4 m, absorption 3,2 dB, Art. Nr. 27244
16. Disposal
Packaging material or electrical products must not be disposed of as
household waste. Use your recycling system. Details are available
from your local authority.
/
] to 2x / 4x / 8x fast forward or reverse.
Advertisement
Table of Contents
