Wireless Range; Maintenance And Cleaning - Indexa DF210A Operating Instructions Manual

Sort by recording mode
!
Click on any file to select it.
The playback can be controlled by clicking the following symbols:
Playback / Pause /
Forwards / Stop
The files can be deleted using the following symbols:
Delete selected file
Delete all files
Note: The storage location on the hard disc can be seen by clicking
"Storage".
14.11 Display setup
!
Click .
!
Click "Display".
!
If you wish to have a time and date stamp on the recorded images then
click on "Time Stamp".
!
If you wish to write the name of the camera on the recorded images then
click on "Camera Name" (in this case the camera name must also be set).
!
Enter the camera name if required.
!
Click to activate the selected settings.
14.12 Advanced function: camera pairing
If you wish to pair the camera to another channel or to pair an additional
camera (max. 3 additional cameras) with the monitor this can be done using
the buttons on the monitor (see section 12.4) or alternatively on the PC:
!
Click .
!
Click "Device".
!
Check that the camera is powered (POWER LED [9] lights red) and that it is
within the reception range of the monitor.
42 - GB
Backwards /
!
Check that "Digital Wireless Camera" is selected.
!
Click on the chosen camera channel "CAM1" to "CAM4".
!
Within 60 seconds press the pairing button [5] on the camera and hold it
pressed for 5 seconds.
!
Click to save the selected settings.
A successfull connection is indicated by the display of the camera picture on the
screen and the lighting of the green connection LED [12].

15. Wireless range

The wireless range is dependent on many factors. In an ideal location and by
free line of sight (between both antennas) a range of up to 200m is possible,
within buildings this is reduced to maybe 20m.
The range cannot be guaranteed as it is dependent on the local conditions.
and
A reduction of the range will be caused by:
!
Walls and Floors, in particular those of metal or with metal reinforcement
!
Coated windows (eg. those with Insulating glass), radiators, mirrors and
other metal surfaces
!
Electrical cables and electrical products (eg. Those containing electrical
motors, microwave ovens)
!
Devices using the same or similar frequency eg. WLAN-systems)

16. Maintenance and cleaning

!
The products are maintenance-free: do not open the housings
!
Check the safety and function regularly
!
If the range of the remote control becomes weak, replace the battery
(CR2025)
!
Remove the mains adapters from the mains sockets before cleaning
!
Use a soft, slightly moist cloth or brush to clean the surfaces
Do not clean using carbon rich cleaners, Petrol, alcohol or similar. These
can be damage the surfaces. Also the fumes cause a danger to health
and of explosion. Do not use any sharp tools (eg screwdrivers) or metal
brushes for cleaning.
17. Optional Accessoires
!
Additional camera DF200KA with accessoires. Art. Nr. 27263
!
A/V extension cable, 3,5mm
Art. Nr. 27234
!
Antenna extension cable for camera with wallbracket
length 2 m, absorption 1,6 dB, Art. Nr. 27243
length 4 m, absorption 3,2 dB, Art. Nr. 27244
!
Weather proof housing for receiver. Art. Nr. 27235
!
Batteryholder for camera (for 4 x AA batteries: battery life max. 6 hours)
Art. Nr. 27242
Æ
Stereoplug / socket, 10m.