Menu Controls
The menu system is controlled by an [MENU], [Enter] and two Arrow (
These buttons function are shown in Figure
LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Use the Menu Buttons to
access and make changes to the menu items. When the desired menu item is reached ,
press the desired Menu Button to display the menu options and to navigate and configure the
menu options as required.
To navigate and access menu setting/selections:
Step 1.
Make sure unit is powered and turned
Step 2.
Press [MENU] to access menu categories.
Step 3.
Use two Arrow (
settings.
Step 4.
Once menu item is reached, press [Enter] to access the menu item
Step 5.
Make changes to parameters as desired.
Step 6.
Press [Enter] button to accept changes.
DMX Address
,
To set, edit
and save a DMX address:
Step 1. Press [MENU].
Step 2. Press [Up] / [Down] (
Step 3. Use [Up] / [Down] (
Step 4. Once all digits are set in DMX address, press [Enter] to set.
Step 5. DMX will display and is saved.
VARI❋LITE - VL800 EVENTWASH QUICKSTART GUIDE
7.
Figure 7: Menu Control
on.
) buttons to navigate through the various options and
) arrows until Address (DMX Address) appears. Press [Enter].
) arrow buttons to select the desired digit.
2 July 2020
) b u tto n s .
parameters.
17