Vari Lite EVENTWASH VL800 Quick Start Manual
  1. Manuals
  2. Brands
  3. Vari Lite Manuals
  4. DJ Equipment
  5. EVENTWASH VL800
  6. Quick start manual

Vari Lite EVENTWASH VL800 Quick Start Manual

Hide thumbs Also See for EVENTWASH VL800:
Table of Contents

Advertisement

Quick Links

Download this manual
VL800 EVENTWASH
This document provides basic setup instructions and safety
warnings for the following product(s):
912400575003
VL800 EVENTWASH

POWER AND DATA

CONNECTING POWER

The luminaire requires standard AC power distribution from 100-240 VAC, 50/60 Hz. Current required depends
on the AC supply voltage and product model.
NOTE: The mating power connector is supplied; however, you will need to purchase or construct a cable ap-
propriate for your application.
Depending on the application, the luminaire's AC input cable may require a diff erent connector. If required,
install a new connector meeting your requirements using the included wire color code reference.
WIRE*
green/yellow
blue
black
*International (harmonized) standard
WARNING! DO NOT connect to three-phase service in countries with 240 volt power.
©2020 Signify Holding. All rights reserved.
DMX in
DMX out
FIGURE 1.
CONNECTION
AC ground
AC neutral
AC line

INCLUDED ITEMS

QUICK START GUIDE
(this document)
VL800 EVENTWASH
Power in
POWER CONNECTOR
1
QUICK START GUIDE
WARRANTY CARD
POWER CONNECTOR
CLAMP
W W W.VA R I - L I T E . C O M

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVENTWASH VL800 and is the answer not in the manual?

Questions and answers

Related Manuals for Vari Lite EVENTWASH VL800

Summary of Contents for Vari Lite EVENTWASH VL800

  • Page 1: Connecting Power

    QUICK START GUIDE VL800 EVENTWASH INCLUDED ITEMS This document provides basic setup instructions and safety warnings for the following product(s): 912400575003 VL800 EVENTWASH WARRANTY CARD POWER CONNECTOR CLAMP QUICK START GUIDE (this document) VL800 EVENTWASH POWER AND DATA CONNECTING POWER The luminaire requires standard AC power distribution from 100-240 VAC, 50/60 Hz.
  • Page 2 Ground (earth) Ground (earth) WARNING! It is not recommended to power any Vari-Lite luminaire from a dimmer - even in ‘NONDIM’ mode. Dimmer and non-dim modules are not suitable sources of power because their output modifi es the AC wave form.
  • Page 3 VL800 EVENTWASH QUICK START GUIDE Step 4. Connect AC Input Cable connector to power input source. Step 5. Dress AC input and data cables and secure them so that they will not interfere with luminaire head and yoke movement. INSTALLATION FLOOR MOUNTING THE LUMINAIRE This luminaire included in this manual are designed to sit directly in a fl...

  • Page 4: Lcd Display And Menu System

    VL800 EVENTWASH QUICK START GUIDE To install in truss: Step 1. Lift luminaire into mounting position. Step 2. Secure in place with clamp handle. Ensure clamp handle hardware that Quick-lock fastener hook in place (e.g.. wing bolt) is properly tightened and that luminaire is fully supported. Step 3.

  • Page 5: Status Bar

    VL800 EVENTWASH QUICK START GUIDE MENU CONTROLS The menu system is controlled by [MENU], [ENTER] and two arrow ( ▲▼ ) buttons. [ENTER] Button To select or change a setting or data value Arrow Keys (Up/Down) Menu navigation / data selection [MENU] Button Used to access main menu parameters...
  • Page 6 VL800 EVENTWASH QUICK START GUIDE QUICK REFERENCE MENU KEY SHORTCUTS MENU KEY SHORTCUTS FUNCTION Holding Menu at Power up bypass motor Menu + Up (▲) ReCAL All Menu + Down (▼) Pan / Tilt Deactivated Menu + Enter Factory Defaults Enter + Up (▲) Lamp On Enter + Down (▼)

  • Page 7: Declaration Of Conformity

    • Original packing materials can be reused for transporting the fi xture. in materials or workmanship from the date of delivery. A copy of Vari-Lite two-year • This fi xture is designed for dry locations only. Exposure to rain or moisture may limited warranty containing specifi...

Table of Contents