Table of Contents
Advertisement
VARI❋LITE - VL800 EVENTWASH QUICKSTART GUIDE
To connect power and data:
Step 1. Connect data cable from console to first luminaire in chain at DATA IN connector.
Step 2. If required, connect additional data cables from DATA THRU connectors to DATA IN
Step 3. At last luminaire in link, install male termination connector at DATA THRU connector.
(Luminaires and other devices on the same DMX chain may not function properly
without termination)
Step 4. Connect AC Input Cable connector to power input source.
Step 5. Dress AC input and data cables and secure them so that they will not interfere with
luminaire head and yoke movement.
12
VL800 EVENTWASH Luminaire Channel Requirements*
DMX512 Channels
22 Channels
Figure 2: Data Link
2 July 2020
Description
16BIT 1 Cell (Default)
**DMX terminator required for last fixture on DMX line.
Menu Display
22
Advertisement
Table of Contents
