Table of Contents
Advertisement
b. Loop safety cable at least once around truss/pipe and secure around pipe.
Note, truss hooks shown are sold separately. Truss and pipe by others.
Step 4.
Make sure hanger is disengaged so luminaire moves
Step 5.
Connect power and data cables according to procedure given in
9.
When hanging the luminaire in a side hang position, natural convection and the designed direction
of the inlet and exhaust cooling fans dictate that the inlet should be closest to the floor and the
exhaust should be towards the ceiling. This eliminates the possibility of one luminaire blowing
exhaust air into the inlet of the luminaire next to it when the luminaires are side-by-side.
If the luminaires are stacked on top of one another in a side hang, a 45° enclosure orientation with
the fan inlet closest to the floor.
VARI❋LITE - VL800 EVENTWASH QUICKSTART GUIDE
Figure 5: Safety Cable Installation / Luminaire Hanging
freely.
2 July 2020
"Connecting Data" on page
15
Advertisement
Table of Contents
