VARI❋LITE - VL800 EVENTWASH QUICKSTART GUIDE
WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is
installed on the luminaire.
Figure 4: Installing Brackets on Luminaire Enclosure
Installing in Truss:
Step l. Lift luminaire into mounting position.
Step 2. Secure in place with clamp handle. Ensure clamp handle hardware that Quick-lock fastener
hook in place (eg. wing bolt) is properly tightened and that luminaire is fully supported.
Step 3. Attach safety cable (as required) as follows (refer to Figure 5):
a. Loop safety cable at least once around safety cable anchor point rod.
14
2 July 2020