Save Configuration - Weidmuller IE-WL-VL-AP-BR-CL User Manual

Wi-Fi device IE-WL-VL-AP-BR-CL
For cases where advanced troubleshooting is required, contact a Weidmüller engineer who can provide you
with an encrypted script file. The encrypted script file can capture additional details on the system.
To run the script, browse to and select the script file using Browse and click Run Script after you have filled
in the following details:
Setting
Diagnostic script
Export diagnostic results
TFTP server IP
Diagnostic script name
Last start time
Last end time
Diagnostic status
Diagnostic result

Save Configuration

The following figure shows how the IE-WL-VL-AP-BR-CL stores the setting changes into volatile and
non-volatile memory. All data stored in volatile memory will disappear when the IE-WL-VL-AP-BR-CL is
shutdown or rebooted. Because the IE-WL-VL-AP-BR-CL starts up and initializes with the settings stored in
flash memory, all new changes must be saved to flash memory before restarting the IE-WL-VL-AP-BR-CL.
This also means the new changes will not work unless you run either the Save Configuration function or the
Restart function.
Description
Use the Browse button to select the Weidmüller diagnosis script file.
Select if you want to export:
- to a file
- to a TFTP server
If you have selected the TFTP option, specify the IP address of the TFTP server.
Displays the name of the script file
Displays the start time of the last script execution
Displays the end time of the last script execution
Displays the progress of the system diagnostics
Displays the result of the system diagnostics.
If you have selected the export to a file option, the system log is encrypted and
packed into a file. The limit on the log file size is 1 MB. When the size of the log file
reaches 1MB another file is created. A maximum of 5 files (5MB) will be kept for
downloading. When the number of files exceeds five, the oldest file is deleted.
3-70
Web Console Configuration