Configuring Wlan Administration Tool - Weidmuller IE-WL-VL-AP-BR-CL User Manual

Wi-Fi device IE-WL-VL-AP-BR-CL
5. Click Next to proceed with the installation. The installer then displays a summary of the installation options.
6. Click Install to begin the installation. The setup window will report the progress of the installation. To
change the installation settings, click Back and navigate to the previous screen.
7. Click Finish to complete the installation of WLAN Administration Tool.

Configuring WLAN Administration Tool

The Broadcast Search function is used to locate all IE-WL-VL-AB-BR-CL APs that are connected to the same LAN
as your computer. After locating an IE-WL-VL-AB-BR-CL, you will be able to change its IP address. Since the
Broadcast Search function searches by TCP packet and not IP address, it doesn't matter if the
IE-WL-VL-AB-BR-CL is configured as an AP or Client. In either case, APs and Clients connected to the LAN will
be located, regardless of whether or not they are part of the same subnet as the host.
1. Start the WLAN Administration Tool program. After the first start of the WLAN Administration Tool the
following window appears. There you have the possibility to set a password for access to the "device
management function"
Software Installation and Configuration
4-76