Relay; Trap - Weidmuller IE-WL-VL-AP-BR-CL User Manual

Wi-Fi device IE-WL-VL-AP-BR-CL
Mail server (SMTP)
Setting
IP address
User name & Password
Setting
From e-mail address
Setting
Max. 63 characters
To E-mail address 1/ 2/ 3/ 4
Setting
Max. 63 characters

Relay

The IE-WL-VL-AP-BR-CL has one relay output, which consists of 2 terminal block contacts on the
IE-WL-VL-AP-BR-CL's top panel. These relay contacts are used to indicate user-configured events and system
failure.
The two wires attached to the relay contacts form an open circuit when a user-configured event is triggered. If
a user-configured event does not occur, the relay circuit will remain closed. For safety reasons, the relay circuit
is kept open when the IE-WL-VL-AP-BR-CL is not powered.
Relay Event Types
You can check the box for Active to enable the event items. All default values are deactivated (unchecked).
Detailed descriptions of the event types are available in the System Logs section.

Trap

Traps can be used to signal abnormal conditions (notifications) to a management station. This trap-driven
notification can make your network more efficient.
Because a management station usually takes care of a large number of devices that have a large number of
objects, it will be overloading for the management station to poll or send requests to query every object on
every device. It would be better if the managed device agent could notify the management station by sending
a message known as a trap for the event.
Description
The IP Address of your email server.
Description
User name and password used in the SMTP server
Description
Enter the administrator's e-mail address which will be shown in
the "From" field of a warning e-mail.
Description
Enter the receivers' e-mail addresses.
3-57
Web Console Configuration
Factory Default
None
Factory Default
None
Factory Default
None
Factory Default
None