Disposal - Cornelius IntelliBlue R134 Kuwait Series Operating Instructions Manual


Caution!
Component damage due to material ageing
Material can age due to long storage periods, thereby affecting the material's properties (e.g. plastics
and seals may become brittle). The properties of lubricants may change due to long storage periods.
o
Check the assemblies and components for damage before each use/before installing them. Do
not install assemblies or components that show visible signs of ageing.
Caution!
Component damage due to freezing liquids
Ambient temperatures that are below freezing will lead to the freezing of any water or cleaning agent
residue remaining inside the unit. This will lead to damage to internal components.
Before shipment, storage or relocation of the unit, the unit is to be cleaned and the cleaning solution
is to be fully drained from the unit.
2.2

Disposal

Disposal of the units must be carried out in compliance with the applicable local and/or national and
international regulations. Units must not be disposed of with household waste.
If the unit contains fuels or lubricants in liquid, paste-like or gaseous form, such as oil, grease, cooling agents
etc., such fuels or lubricants are to be collected using appropriate measures and disposed of in compliance
with the applicable local and/or national and international regulations. Such fuels or lubricants must always
be prevented from seeping into the ground, the sewage system and any bodies of water, and must always
be prevented from entering the atmosphere.
IntelliBlue R134 Kuwait
8