5.
Select the port type that matches the product connection method from the [Select port type] drop
down list and click [OK].
For LAN or wireless LAN connection: [TCP/IP (LAN)]
For Bluetooth or RS-232C connection: [SERIAL (COM)]
For IEEE1284 connection: [PARALLEL (LPT)]
6.
Configure the port settings and click [OK].
If you selected [TCP/IP (LAN)]
Note:
You cannot set the same name as an existing port name.
The computer cannot communicate with the destination product if the [Product Name or IP Address] and
[Port Number] settings do not match those of the product.
Click [OK] to check communications using the configured settings. If communications failed, the following
screen appears.
[Cancel]
Returns to the previous screen. Click this button to change [Printer Name or IP Address] or any
other settings.
[Try Again]
Checks communications again.
[Continue]
Does not check communications and proceeds to the next step. Click this button when you want
to continue with the port setup without checking communications with the product.
35