Zcom SP230 Series User Manual page 28

SP230/SP230-S5
Parameter
requesting DHCP
Accept router
advertisements
Send router solicitations
The following parameters are available in this section:
Parameter
Bring up on boot
Use broadcast flag
Use default gateway
Use DNS servers advertised
by peer
Use custom DNS servers
Use gateway metric
Client ID/Vendor Class to
send when requesting DHCP
Override MAC address/MTU
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
Description
Select this option to accept router advertisement on this interface.
Select this option to send router solicitations from this interface.
Note: This option is only available if Accept router advertisements is
enabled.
Description
Select this option to bring up this interface when the device
rebooted.
Select this option to use the broadcast flag on this interface.
Select this option to use the DHCP assigned default gateway on
this interface.
Select this option to use the DHCP assigned DNS server addresses
on this interface.
Enter the IP address or domain name for a custom DNS server
here.
More than one entry can be created.
Enter the metric for the gateway here.
Enter the ID/vendor class of the DHCP client that is sent when the
DHCP service is requested here.
Enter a MAC address/ MTU value here to override the default MAC
address/MTU value for this interface.
User Manual
Page 28