DAVIS Temperature/Humidity Sensor Install Manual page 9

Displaying Dew Point on the Weather Monitor II
Follow the directions below to use the dew point function on your Weather
Monitor II. For a description of dew point, consult the appropriate section of
the Weather Monitor II manual.
Note: Instructions for displaying dew point are contained in the GroWeather, Energy EnviroMonitor, and
Health EnviroMonitor manuals.
You may display dew point in either ˚F or ˚C. The Weather Monitor II records
high and low dew points, and has an alarm to alert you when temperature
comes within 2˚F (1˚C) of dew point.
To Display the Current Dew Point
Press DEW. The dew point and the words DEW POINT appear on the display.
To Change the Unit of Measure
1. Press DEW.
2. Press UNITS.
The console display switches from ˚F to ˚C or from ˚C to ˚F. To return to the
previous format, press UNITS again
To Display High and Low Dew Points
1. Press DEW.
2. Press RECL.
The high dew point appears. After a few seconds, the display will show
the time the high was recorded, and then the date it was recorded.
Press RECL again.
3.
The low dew point appears. After a few seconds, the display will show the
time the low was recorded, and then the date it was recorded.
4. Press any key to exit.
Displaying Dew Point on the Weather Monitor II
Current dew point
Page 9