DAVIS Temperature/Humidity Sensor Install Manual page 4

Typical Industrial GroWeather/EnviroMonitor Installation
The illustration below shows a typical Industrial T/H Sensor installation for
the GroWeather, Energy EnviroMonitor, or the Health EnviroMonitor.
Choosing a Location for the T/H Sensor
Use the following suggestions to find a suitable location in which to mount the
sensor. Care taken in choosing a location improves the accuracy, reliability, and
durability of the sensor. The ideal location would be on the North side of the
building in the Northern Hemisphere, or the South side in the Southern Hemi-
sphere.
Note: When you choose a location for the sensor, always take into consideration nearby objects. Objects
which heat up in direct sunlight such as pavement, or that produce radiative cooling effects such as a
fountain, may affect the temperature of the air in the vicinity which can affect the temperature and
relative humidity readings from the sensor.
Page 4
Typical industrial GroWeather/EnviroMonitor installation
Standard & Industrial External Temperature/Humidity Sensor