DAVIS Temperature/Humidity Sensor Install Manual page 3

Typical Standard GroWeather/EnviroMonitor Installation
The illustration below shows a typical standard installation for the GroWeather
(used to measure air temperature), Energy EnviroMonitor, or the Health Envi-
roMonitor. The sensor cable attaches to connector S2 on the sensor interface
module (SIM). On GroWeather systems, the sensor can also attach to
connector S3 to measure a second temperature (such as soil temperature).
Installing the Sensor
T S G W
YPICAL TANDARD RO
/E M
EATHER NVIRO ONITOR
I
NSTALLATION
Page 3