DAVIS Temperature/Humidity Sensor Install Manual page 2

I
NSTALLING THE
Follow the instructions in this section to install your sensor. Make sure you
read "Choosing a Location for the Sensor" on page 5 as it contains important
information concerning placement of the sensor.
Typical Weather Wizard II-S, Weather Wizard III, or Weather Monitor II
Installation
The illustration below shows a typical installation for the Weather Wizard II-S,
Weather Wizard III, or Weather Monitor II.
Note: You may also use the Radiation Shield and Sensor Mounting Arm (pictured below) if desired.
Page 2
S
ENSOR
T
YPICAL
I
NSTALLATION
Stainless Steel Temperature Probe