Replacing The Full-Length Graphics Cards; Procedure; Post-Requisites - Dell XPS 8930 Service Manual

Replacing the full-length graphics cards

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Align the full-length graphics card with the slot on the system board.
2 Place the card into the slot and press down firmly until the full-length graphics card snaps into place.
3 Connect the power cables to the full-length graphics card.
4 Slide the tab on the full-length graphics-card bracket into the slot on the chassis and snap it into place.
Post-requisites
1 Follow the procedure from step 9 to step 10 in
2 Replace the right-side cover.
54 Replacing the full-length graphics cards
computer. After working inside your computer, follow the instructions in
"Replacing the power-supply
www.dell.com/
unit".
27
After working inside