Chapter 3 Object Dictionary (Od); Section Definition Of Object Dictionary - Mitsubishi Electric MELSERVO-JET MR-JET-G-N1 User Manual

3
OBJECT DICTIONARY (OD)
For details of the object dictionary, refer to the following manual.
MR-JET-G-N1 User's Manual (Object Dictionary)
The data that a CAN application protocol over EtherCAT (CoE) device holds, such as control parameters, command values,
and feedback values, is handled as an object composed of an Index value, object name, object type, R/W attribute, and other
elements. The data is exchanged between the master and slave devices. The aggregate of these objects is called an object
dictionary (OD).
3.1

Section definition of object dictionary

With the CoE protocol (CAN application protocol over EtherCAT), objects of an object dictionary are categorized by Index
depending on the descriptions as shown in the following table. Refer to the Reference column for the details of each object.
Index
1000h to 1FFFh
2000h to 5FFFh
6000h to 9FFFh
Index
0000h to 0FFFh
1000h to 1FFFh
2000h to 25FFh
2A00h to 2FFFh
6000h to 67FFh
Description
Communication profile
Objects defined by the manufacturer
CiA 402 drive profile
Description
Data type area
CoE communication area
Servo parameter area (manufacturer specific)
Servo control command/monitor area (manufacturer
specific)
CiA 402 drive profile area
Reference
MR-JET-G-N1 User's Manual (Object Dictionary)
Reference

Page 13 PDO (Process Data Object) COMMUNICATION
Page 20 SDO (Service Data Object) COMMUNICATION
MR-JET-G-N1 User's Manual (Object Dictionary)
MR-JET-G-N1 User's Manual (Object Dictionary)
3 OBJECT DICTIONARY (OD)
3.1 Section definition of object dictionary
3
11