Table of Contents
Advertisement
Certification
The RUGGEDCOM RS930W device has been thoroughly tested to guarantee its con-
formance with recognized standards and has received approval from recognized reg-
ulatory agencies.
6.1
Approvals
This section details the standards to which the RUGGEDCOM RS930W complies.
6.1.1
CSA
This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 1550963:
•
•
•
•
•
•
•
It is specifically approved for use in hazardous locations with the following markings:
•
RUGGEDCOM RS930W
Installation Manual, 02/2020, C79000-G8976-1035-07
CAN/CSA-C22.2 No. 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National Standard, with UL 60950-1)
UL 60950-1
Information Technology Equipment – Safety Part 1: General Requirements
CAN/CSA-C22.2 No. 0-M91
General Requirements - Canadian Electrical Code, Part II
CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment Industrial Products
CAN/CSA-C22.2 No. 213-16
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Divisions 1 and 2 Hazardous (Classified) Locations (Bi-National Standard with
ANSI/ISA-12.12.01-2016)
UL 916
Standard for Energy Management Equipment
ANSI/ISA-12.12.01-2015
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
Class I, Division 2, Groups A, B, C, D
6
37
Advertisement
Table of Contents
