1. Commands are provided for backward compatibility on EX2. The KcQQQ command will respond with the new command equivalent; see associated new commands.

2. The EX2 uses the same Sensor Calibration value setup commands as display model printers.

3. The EX2 will accept Display-Equipped module IDs (D & G) as command parameters for upward compatibility; however, query commands will result in printer responses with

module IDs that are non-display compatible, providing backward compatibility.

4. Present distance changes for EX2 will only be accepted if the Stop Location (SL) is set to "Host."

Class Series Programmer's Manual

Extended System-Level Command Functions

Value /

Range

Interpretation

A, C, F, I, L,

M, N, P, R,

See Table 5-13.

T, V, X

A, K, S, L,