Datamax A-4310 Programmer's Manual page 177

Font
Font 0
Font 1
Font 2
Font 3
Font 4
Font 5
Font 6
Font 7
Font 8
Internal Smooth Font 9 (Smooth Font) Point Size Specifiers
Label format records with font code 9 (in Format Record header field b) can specify any of the font sizes
in the leftmost column of the table below. The corresponding specification in either column labeled Ann
or 0nn is used in the font size/selection (eee height) field to select the desired font size. Optional font
sets may contain subsets of those described here. For an optional font set that generates these fonts via
scalable font technology, the character mapping for this font is the selected scalable symbol set (see
Appendix E).
In the sample format below, a 300 DPI printer will use 4-point smooth font to produce a printed label
with the words "four point font". Sample format:
<STX>L<CR>
1911A0400100010four point font<CR>
E<CR>
Point
Size
203 DPI Print Resolution
4
5
6
8
10
12
14
18
24
30
36
48
72
[1]
All fonts greater than A36 are created from multiples of smaller fonts, 2x or 3x, as available.
[2]
All fonts greater than A24 are created from multiples of smaller fonts, 2x or 3x, as available.
[3]
Available at 300 DPI and greater print resolutions only.
Table C-6: Internal Bit-Mapped (Smooth Font) 9 Size Chart
Class Series Programmer's Manual
Appendix C – Available Fonts
Height
20
38
54
80
106
154
190
94
82
Table C-5: Font Sizes @ 600 DPI Resolution
Smooth Font 9 Font Size Specification Syntax
Ann
[1]
300, 400, & 600 DPI Print Resolutions
-
-
A06
A08
A10
A12
A14
A18
A24
A30
A36
A48
-
Width Spacing
14
20
30
42
54
54
94 12
44 14
44 14
A04
A05
A06
A08
A10
A12
A14
A18
A24
A30
A36
A48
A72
Point Size
2 2.4
6 4.6
6 6.5
6 9.6
8 12.7
8 18.5
22.8
11.3
9.8
[2]
0nn
-
[3]
000
001
002
003
004
005
006
007
008
009
010
-
161