Datamax A-4310 Programmer's Manual page 151

Class series
Hide thumbs Also See for A-4310:
Table of Contents

Advertisement

eee:
This field has interpretations dependent upon the value of the font b field, as shown below.
b Font Field Value
0-8
9
A-T
a-z
Wxx
X,Y
ffff:
The lower left corner of a label is considered the "home position" (see Figure 8-1). The row
position field is a vertical coordinate that determines how far above the home position the data is to
be printed. Field data is interpreted in hundredths of an inch or tenths of millimeters.
gggg:
This field is a horizontal coordinate that determines how far to the right of "home position" the
data will be printed. Appendix G lists the maximum values of the gggg field.
hhhh:
The height of a scalable font can be specified in two ways: points or dots. To specify the height in
points the first character of the field is a 'P' followed by the number of points, 004 to 999. To
specify the size in dots, all four characters must be numeric. This field must be specified for
scalable fonts. (See note below Optional Scalable Font Width.)
iiii:
The width of a scalable font can be specified in two ways, points or dots. To specify the width in
points, the first character of the field is a 'P' followed by the number of points, 004 to 999 points.
To specify the size in dots, all four characters must be numeric. This field must be specified for
scalable fonts. See note below.
Note: To ensure that the data stream is portable to different Datamax printers, specify the font size in
points. If the font is specified in dots, it will output differently on printers with different DPI/MMPI
resolutions. There are 72.307 points per 1 inch (2.847 mm).
Class Series Programmer's Manual
Generating Label Formats
Bar Code Height (Font Size/Selection)
eee Field Range
000
000-999, A04-A72, S00-S9z,
U00-U9z, u00-u9z
000-999
000-999
000-999
000
Table 8-5: Bar Code Height Field Interpretations
Row Position
Column Position
Optional Scalable Font Height
Optional Scalable Font Width
eee Field Interpretation
Not used –Internal bitmapped font
Font height; Font selection
Bar code height (with human readable)
Bar code height
Bar code height (with human readable)
Not used
135

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents