Download
Share
Print this page
Datamax Mark II M-4206 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Datamax Manuals
  4. Printer Accessories
  5. M-Class Mark II M-4206
  6. Installation instructions manual

Datamax Mark II M-4206 Installation Instructions Manual

M class internal ethernet print server option
Hide thumbs Also See for Mark II M-4206:

Advertisement

Quick Links

Download this manual See also: Operator's Manual
92-2377-01 Rev. B
Internal Ethernet Print Server Option

Installation Instructions

Corporate Headquarters
4501 Parkway Commerce Blvd.
Orlando, Fl 32808
Phone: 407-578-8007
Fax: 407-578-8377
Asia-Pacific
Datamax International
19 Loyang Way
Herbert House
#01-01 CILC Building
12 Elizabeth Way, Pinnacles
Singapore 508724
Harlow, Essex CM19 5FE UK
Phone: +65 542-2611
Phone: +44 1279 772200
Fax: +65 542-3611
Fax: +44 1279 424448
Printed in the U.S.A. © Copyright 2004

Advertisement

loading

Related Manuals for Datamax Mark II M-4206

Summary of Contents for Datamax Mark II M-4206

  • Page 1: Installation Instructions

    Installation Instructions Corporate Headquarters 4501 Parkway Commerce Blvd. Orlando, Fl 32808 Phone: 407-578-8007 Fax: 407-578-8377 Asia-Pacific Datamax International 19 Loyang Way Herbert House #01-01 CILC Building 12 Elizabeth Way, Pinnacles Singapore 508724 Harlow, Essex CM19 5FE UK Phone: +65 542-2611...

  • Page 3: Tools Required

    2. Open the cover. Remove any installed media/ribbon from the printer. 3. Remove the single Screw on the rear of the printer and remove the two Screws securing the side cover. 4. Open the cover, remove the two Screws from the inside of the printer as shown.
  • Page 4 5. Lift the cover up and off the printer. 6. Remove the two Screws and the Cover Plate from the rear of the printer. Plastic Cover Removal: 1. On the rear of the printer, remove the two Screws securing the cover. Screws Screws...
  • Page 5 2. Open the cover, slide the cover to the rear of the printer as shown. Be sure the Slide on the cover is clear of the Catch on the frame of the printer. 3. Lift the cover up and off the printer.
  • Page 6 Installing the Internal Ethernet Print Server Assembly Slide the Print Server Assembly into the rear of the printer and secure with the two previously removed screws. 2. Install each end of the supplied Ribbon Cable into its corresponding connectors on the printer’s main board and...

  • Page 7: Setup And Configuration

    The Print Server makes IP requests at power-up. If using this method of discovery, after the connection is established print a Configuration Label (see below) from the printer to obtain the IP Address and then use it to install your printer port and driver to complete your setup.
  • Page 8 Turn OFF the printer and then back ON. Once you have entered your IP settings into the printer you can then install the port and printer driver using the Windows ® ‘Add a Printer Wizard’. See section, Installing the Printer Driver and Port in this document.
  • Page 9 Using the HTML Pages The printer has resident HTML (Web) pages that allow configuration of network and printer settings as well as performing status queries and diagnostic tests. To configure the Print Server and other internal printer settings you can access the printer via HTML pages using any Web browser.
  • Page 10 Network Status TCP/IP Configuration...
  • Page 11 System Settings, Media Settings, and Print Control Many of the printer's internal menu settings can be controlled from the following next six screens. This allows the user to adjust many of the printer's settings remotely without using the printer's front panel. For more information on the function of...
  • Page 12 Printer Options, Communications, and Diagnostics...
  • Page 13 Network Print Options Reset Network Parameters Change Password...
  • Page 14 Click on ‘Have Disk’. Browse to the “\DRIVERS\Seagull” folder on the CD-ROM, make sure the file “Datamax for 95, 98, me, 2000, and xp.inf” is selected and click ‘OK’. Select the ‘M-4208’ printer from the list and then click ‘Next’.
  • Page 15 Name’ fields do not need to be changed. When finished click “OK’ Once the Printers window opens, right- click on the printer icon and select ‘Properties’ from the drop down menu. In the ‘Add Port’ window, Select ‘Other’ and “Seagull Scientific Port”...
  • Page 16 Click on ‘Have Disk’. Browse to the “\DRIVERS\Seagull\Nt 4\” folder on the CD- ROM, make sure the file “Datamax for nt 4.0 only…” is selected and click ‘Open’. Click ‘Add Port’. In the top field enter the IP address of your printer.
  • Page 17 Select the ‘M-4208’ printer from the list and then click ‘Next’. Select whether or not to share this printer on your network. Then Click ‘Next’. Your computer will now copy the necessary files from the CD- ROM. The driver and port installation is now complete.
  • Page 18 Select on ‘Create a new port:’ and then select ‘Standard TCP/IP Port’ from the drop down menu. Click ‘Next’ In the ‘Printer Name or IP Address:’ field enter the IP address of your printer. The ‘Port Name’ field does not need to be changed.
  • Page 19 ‘Yes’ to continue installation. Browse to the “\DRIVERS\Seagull” folder on the CD-ROM, make sure the file “Datamax for 95, 98, me, 2000, and xp.inf” is selected and click ‘OK’. Select the ‘M-4208’ printer from the list and then click ‘Next’.
  • Page 20 Select on ‘Create a new port:’ and then select ‘Standard TCP/IP Port’ from the drop down menu. Click ‘Next’ In the ‘Printer Name or IP Address:’ field enter the IP address of your printer. The ‘Port Name’ field does not need to be changed.
  • Page 21 ‘Yes’ to continue installation. Browse to the “\DRIVERS\Seagull” folder on the CD-ROM, make sure the file “Datamax for 95, 98, me, 2000, and xp.inf” is selected and click ‘OK’. Select the ‘M-4208’ printer from the list and then click ‘Next’.

This manual is also suitable for:

Mark ii m-4210Mark ii m-4208Mark ii m-4306Dpo78-2538-01