Step
Click the Taskbar tab.
Select the Auto-hide the taskbar check box
Click OK.
Trigger Routing
The M9384B VXG supports the following triggering modes for starting modulation.
Immediate
External Triggering Can be used for synchronization with an external trigger source for
M9384B Startup Guide
Step 3: Prepare and Power up the Signal Generator
(Default) Modulation begins as soon as the Vector Modulator is ready.
starting waveform playback. An external trigger can also be used to start
Pulse Modulation.
Notes
Shortcuts (Key Combinations)
these selections.
The Taskbar and Start Menu Properties dialog
appears.
If you are not using a mouse, press Tab
repeatedly until the auto-hide option is
selected, then press Select to toggle the
check box state.
This applies the change and closes the dialog
box.
Trigger Routing
section to make
51