General Safety Considerations; Before Applying Power; Servicing; Operating Conditions - Keysight M9384B Startup Manual

General Safety Considerations

Before Applying Power

Servicing

Operating Conditions

M9384B Startup Guide
If this product is not used as specified, the protection provided by
the equipment could be impaired. This product must be used in a
normal condition (in which all means for protection are intact)
only.
The M9384B VXG is heavy and requires two people to lift and
carry it. Do not attempt to lift or carry it on your own.
The measuring terminals on this instrument are designed to be
used with external signals described in Measurement Category I,
but NOT with external signals described in Categories II, III, and
IV. The input of this instrument cannot be connected to the
mains.
The Mains wiring and connectors shall be compatible with the
connector used in the premise electrical system. Failure to
ensure adequate earth grounding by not using the correct
components may cause product damage, and serious injury.
These servicing instructions are for use by qualified personnel
only. To avoid electrical shock, do not perform any servicing
unless you are qualified to do so.
If this product is not used as specified, the protection provided by
the equipment could be impaired. This product must be used in a
normal condition (in which all means for protection are intact)
only.
This product is designed for use in Installation Category II and
Pollution Degree 2 environment.
Step 1: Unpack, Inspect, and Verify Shipment
Safety Information
19