Configuring Person & Vehicle Detection - Lorex N881 Series User Manual

14 Smart Motion Detection
• Install the camera between 8-16ft (2.5-5m) off of the ground.
NOTE
Accuracy of Person & Vehicle detection will be influenced by multiple factors, such as the object's distance from
the camera, the size of the object, and the height and angle of the camera. Night vision will also impact the accu-
racy of detection.
14.2 Configuring Person & Vehicle Detection
Set preferences for person and/or vehicle detection per channel.
To configure person and/or vehicle detection:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click , then click EVENT. Click the MOTION tab on the side panel, then click
SMD/Deterrence on the top panel.
3. Select a channel with a compatible camera you would like to configure smart detection for.
4. Check Enable next to Smart Motion Detection.
5. Check Enable next to Person and/or Vehicle.
NOTE
A maximum of 16 channels will support person/vehicle detection at once.
#LX400113; r. 3.0/56326/56332; en-US 49