Camera Toolbar - Lorex N881 Series User Manual

Table of Contents

Advertisement

8
Using the On-Screen Display
• Right-click anywhere on the Live View screen.
1. Viewing Modes: Select how many channels are shown on screen during live viewing.
2. Pan/Tilt/Zoom: Control and configure settings for Pan-Tilt-Zoom (PTZ) cameras. For full in-
structions on connecting and using PTZ cameras, see 17 Pan/Tilt/Zoom (PTZ) Cameras, page
106.
3. AutoFocus: Access zoom/focus controls for auto-focus cameras (not included).
4. Camera Setting: Configure image settings for cameras. For full details, see 8.5 Camera Im-
age Settings, page 21.
5. Info: Displays system information, such as model number, device ID, IP address, etc.
6. Sequence: Start or stop Sequence Mode. In Sequence Mode, the system display will automati-
cally cycle through connected channels every few seconds.
7. Disable Beep: Temporarily disable the current audible warning.
NOTE
Audible warnings can be given for a wide range of events, such as hard drive issues, network connectivity,
motion detection events and more. Disabling the current audible alarm using the Quick Menu will silence the
recorder only for a short time, then audible warnings will continue.
8. Playback: Opens the Playback Menu. This allows you to search for video recordings saved
on the recorder's hard drive. For details on using the Playback menu, see 10 Playback, page
28.
9. Smart Search: Search for person and vehicle detection events only from compatible cameras.
For full instructions, see 14.3 Searching for Person & Vehicle Detection Events (Smart
Search), page 51
10. Manual: Select manual recording and snapshot options. For details, see 9.4 Setting up Sched-
uled or Manual Recording, page 25.
11. Device Search: Open the Device Search menu to manage IP cameras over the local network.
12. Main Menu: See 16 Using the Main Menu, page 59 for full instructions on using the Main
Menu.

8.3 Camera Toolbar

The Camera Toolbar lets you perform quick functions for a specific channel on the recorder.
To use the Camera Toolbar:
• Hover the mouse near the top of a channel with a connected camera.
#LX400113; r. 3.0/56326/56332; en-US
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

N881a63bN881a38b

Table of Contents