Lorex N881 Series User Manual page 129

20 DDNS Setup (Advanced)
2. Click , then click NETWORK. Click the DDNS tab on the side panel.
3. Check to enable DDNS connectivity.
4. Configure the following:
• DDNS Type: Select Lorex DDNS.
• Domain Name: Enter the first part of the DDNS domain that you requested during setup.
• User ID: Enter the username provided in the DDNS confirmation email.
• Password: Enter the password provided in the DDNS confirmation email.
5. Click Apply.
You will now be able to access your system remotely using DDNS. Enter the full domain
name into a web browser (e.g.,
the provided credentials.
NOTE
If your system uses an HTTP port other than 80, you will need to add a colon to the end of your DDNS domain
name and enter the port number (e.g.,
#LX400113; r. 3.0/56326/56332; en-US
http://www.tomsmithsecurity.lorexddns.net) and login using
http://www.tomsmithsecurity.lorexddns.net:81)
121