All-in-one portable monitor with keyboard (12 pages)
Summary of Contents for Elecrow SF116
Page 1
ELECROW 11.6” 1920*1080 IPS Portable Monitor Model: SF116 USER MANUAL Customer Support: Should there be any questions, please feel free to let us know and contact us with info@elecrow.com . your purchase order number at...
Rotate the Screen Chapter 03: Screen Setup 3-1. How to Reconfigure OSD (On-Screen Display) Menu 3-2. OSD Function Introduction Chapter 04: Specifications Chapter 05: Troubleshooting Guide and Warranty 5-1. Troubleshooting Guide 5-2. Warranty 5-3. Custormer Support 2019 ELECROW All Rights Reserved.
• 3. Wipe the monitor with a clean, soft and dry cloth. • Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor • Do not spray water or detergent directly on the product. 2019 ELECROW All Rights Reserved.
• 6. Power on the product and computer. 1-2. Package Contents • 1 x Monitor • 1 x HDMI to HDMI Cable • 1 x Power Supply • 1 x Metal Stand • 1 x User Manual 1-3. Product Description 288.0mm 25.0mm 2019 ELECROW All Rights Reserved.
When in the OSD menu, press to exit the OSD menu. AUTO Green light, indicated the working status. Turn on/off the monitor when it powered. POWER When in the OSD menu, press to confirm the selection. 2019 ELECROW All Rights Reserved.
• 3. Click the Multiple display drop-down list, select Extend these displays or Duplicate these displays. *If you can’t see the additional monitor listed, please click Detect. If it doesn’t work. Restart your PC then try below steps again 2019 ELECROW All Rights Reserved.
• 6. Select the AUTO to return to the previous menu or MENU to save the setting. If you want to adjust any other functions, repeat steps 2-5. 2019 ELECROW All Rights Reserved.
Only under the Standard Mode, you could adjust the parameter of Brightness/ Contrast / ECO/DCR by yourself. Image IMAGE H.POSITION V.POSITION CLOCK PHASE ASPECT WIDE • Aspect: Adjusts the aspect ratio to “WIDE” or “4:3”. 2019 ELECROW All Rights Reserved.
Page 9
• OSD V. POS.: Adjust the vertical position of OSD menu and the adjusting range is from 0 to 100. • OSD Timer: Adjust OSD timeout from 5 to 60. • Transparency: Adjust the transparency of OSD menu and adjusting range is from 0 to 100. 2019 ELECROW All Rights Reserved.
Page 10
1920X1080 60HZ • Signal Source: Adjust the signal source to “HDMI ” or “VGA”. • Low Blue Light: The adjusting range is from 0 to 100. • Volume: Adjust the volume in the range of 0-100. 2019 ELECROW All Rights Reserved.
Troubleshooting Guide and Warranty 5-1. Troubleshooting Guide • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, please contact customer support. 2019 ELECROW All Rights Reserved.
Image is Blurred 5-2. Warranty • ELECROW Monitors carry a one (1) year limited warranty from the purchase date. In order to receive warranty service, proof of purchase of the ELECROW product is required. To obtain warranty service, please contact Customer Support.
Need help?
Do you have a question about the SF116 and is the answer not in the manual?
Questions and answers