Advertisement
external power supply automatically.
4.2 Outdoor Thermo Sensor
Batteries compartment (D4) of thermo sensor is locating behind the
back cover,
Insert 2 x AAA batteries observing polarity [ "+" and "–" marks]
Set Up Operation / Main unit
Weather Forecast Function
( This is very important )
5.1 Operation
After installing batteries in sensor and power on in the
main unit , hold "WEATHER" button (B7) for 3 seconds,
weather icon will flash on the LCD. Enter the current
weather by pressing "▼" or "▲"button. Press "WEATHER"
button to confirm the setting.
After this please leave it , This weather station will connect
with outdoor sensor and with radio control Signal
automatically, You don't need to do anything further, Radio
control will connect with in few mins to few hours and some
time can take up to 24h.
The weather forecast may not be accurate if the current
weather entered is not correct. The weather station will start
the first forecast at 6 hours later after the current weather
status is entered.
The current weather status should be entered again if the
4
Advertisement
