NI-VXI Software Installation and Configuration
Additional Programs and Files
The /tbl directory contains the following table files.
•
creg.tbl contains device information for use by the Resource Manager.
•
mfnameid.tbl contains the global data base of the manufacturer names and their ID
associations.
•
model.tbl contains the global data base of the model names, manufacturer names, and the
model codes associations.
•
device.tbl contains the global data base of the device names, manufacturer names,
model names, and frame and slot associations for the system.
•
nonvxi.tbl contains the global data base for all non-VXI devices in the system.
•
intcfg.tbl contains the system interrupt configuration information.
•
trigcfg.tbl contains TTL trigger configuration editor information.
•
utilbus.tbl contains the utility bus configuration editor information.
•
vxibus.cfg contains the bus configuration information.
•
vxila.cfg contains the logical address configuration information.
•
vxidev.cfg contains the device configuration information.
The /include directory contains include files for the C language interface.
•
nivxi.h is the main header file containing the C prototypes for the NI-VXI functions.
•
cvxi.h contains definitions for constants used by the C language interface cvxi.c file.
•
datasize.h contains data size specifications.
•
busacc.h contains parameter and return values for the bus access functions.
•
devinfo.h contains parameter and return values for the device information and system
configuration functions.
•
vxiint.h contains parameter and return values for the interrupt and signal functions.
•
sysint.h contains parameter and return values for the system interrupt functions.
•
trig.h contains parameter and return values for the trigger functions.
•
ws.h contains parameter and return values for the Commander and Servant Word Serial
functions.
VXI-AT2023/NI-VXI ISC 386/ix Getting Started
3-2
© National Instruments Corporation
Chapter 3