National Instruments VXI-AT2023 Getting Started page 41

NI-VXI Software Installation and Configuration
Table 3-1. Logical Address Configuration Characteristics (continued)
Characteristic
Slave DMA Channel
Resource Manager Delay
VXI-AT2023/NI-VXI ISC 386/ix Getting Started
Description
This indicates the slave DMA channel to be
used in all slave accesses to the VXI Shared
RAM in A24 space or the PC I/O in A16
space. This value must correspond to jumper
settings on the AT-MXI board. You can
select the NONE option with any jumper
settings.
Range = 0, 1, 2, 3, 5, 6, 7, 0xff (NONE)
Note: If you select the NONE option, slave
accesses to VXI Shared RAM and to PC I/O
space will not succeed. Accesses to VXI-
defined registers on the AT-MXI board,
however, remain unaffected.
Time in seconds that the Resource Manager
waits before accessing the configuration
registers of any other device in the system.
Range = 0 sec to 65535 sec
3-8
Default Value
3
5 sec
© National Instruments Corporation
Chapter 3