Table of Contents
Advertisement
1Attentions
1.1Safety Instructions
1)
Please switch to the correct local voltage (115V-230V) before turning on the printer. Be sure
the switch is in the correct position or it will damage the power supply unit (PSU).
2)
Be sure all wires are correctly connected before turning on the printer.
3)
Don't touch extruder head or hot bed when printing as they generate high temperature
which may cause burn.
4)
Don't leave the printer unattended when printing.
1.2Factory Test before Delivery
To ensure quality, each printer is tested at the factory. As a result, there may be filament residue
in the extruder head or on the hot bed, but it should not affect normal use. We provide the spare
nozzle in the accessory kit just in case.
Shenzhen Getech Technology Co.,Ltd
4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the A30 Pro and is the answer not in the manual?
Questions and answers